Program Mode - RAIS/attika VIVA L GAS-Serie Benutzerhandbuch

English

PROGRAM MODE

NB!
The temperature set for Thermostatic mode is
the temperature for the operating time in Program
mode� If the time set for Thermostatic mode is
changed, the temperature for the operating time in
Program mode also changes�
Default setting:
OPERATING TIME (thermostatic mode) TEMPERA-
TURE: 21 °C (70 °F)
TEMPERATURE FOR TURNING OFF "--" (only pilot
light)
NB! The temperature set (Thermostatic mode) and
temperature for shutting down are the same for each
day�
ON:
1 or 2,
Press the button
ON or OFF is displayed�
OFF:
1� Press on the or
button to enter Manual
mode�
2� Press on the button to
enter Thermostatic mode�
SETTING THE TEMPERA-
TURE:
1� Press the button and
hold it down until flash-
es� ON and the temperature
set (setting in Thermostatic
mode) are displayed�
2� Continue by pressing the
button or waiting�
is displayed and temperature
flashes�
3� Select temperature
at which to shut down
by pressing on the or
button�
4� This is confirmed by press-
ing on the button�
attika
RAIS/ - User manual for VIVA L Gas
or
NB!
Either continue to PROGRAM 2 and set oper-
ating time and time for shutting down or stop pro-
gramming here� PROGRAM 2 remains deactivated�
,OFF
NB! PROGRAMS 1 and 2 use the same operating
temperature (Thermostatic mode) and temperature
for shutting down for ALL, SA:SU and Daily Timer (1,
2, 3, 4, 5, 6, 7) When a new operating temperature
(Thermostatic mode) and temperature for shutting
down have been set, this temperature will become
the new default setting�
NB! If ALL, SA:SU or Daily Timer are programmed for
operating temperature and temperature for shutting
down for PROGRAM 1 and PROGRAM 2, these will
become the new default times� The batteries must
be removed to clear temperatures, operating times
and times for shutting down for PROGRAM 1 and
PROGRAM 2�
SETTING THE DAY:
5� ALL flashes� Press the
or button to select
from ALL, SA:SU, 1, 2, 3, 4,
5, 6, 7�
6� This is confirmed by press-
ing on the button�
ALL is selected.
SETTING OPERATING TIME
(PROGRAM 1):
7� ,1, ON is displayed,
ALL is displayed briefly and
HOUR flashes�
8� Select hour by pressing on
the or button�
9� This is confirmed by press-
ing on the button�
, 1, ON is displayed, ALL
is displayed briefly and
Minutes flashes�
10� Select minutes by press-
ing on the or button�
11� This is confirmed by
pressing on the button�
SETTING TIME FOR TURN-
ING OFF
(PROGRAM 1):
12� , 1, OFF is displayed,
ALL is displayed briefly and
HOUR flashes�
13� Select hour by pressing
on the or button�
14� This is confirmed by
pressing on the button�
1, OFF is displayed, ALL is
displayed briefly and Min-
utes flashes�
15� Select minutes by press-
ing on the or button�
16� This is confirmed by
pressing on the button�
,
46