Installation Of Stove; Installation; Gas Connection; Ventilation - RAIS/attika VIVA L GAS-Serie Benutzerhandbuch

attika
English RAIS/ - User manual for VIVA L Gas

installation of stove

Installation

It is important that the stove is correctly installed from both an environ-
mental and safety point of view�
The stove must only be installed by an authorised gas installer
When installing the stove, all local rules and regulations, including those
referring to national and European standards must be complied with�
Local authorities and an authorised gas installer should be contacted
before installation�
There must be no unauthorised modifications of the stove�
Before installation begins, it should be confirmed that the information
on the data plate regarding gas type and pressure is in accordance with
the local gas supply conditions under which the stove is to be installed�
You should ensure that the gas supply can supply the required quantity
of gas and pressure as described on the data plate�

Gas connection

The pipe on the gas hose has an external diameter of Ø8mm�

Ventilation

This stove has a sealed combustion chamber and is intended for a bal-
anced draught� There is therefore no need for an extra air supply�
It is recommended that sufficient fresh air is supplied to the room to
maintain a comfortable environment�
This stove may be installed in a completely airtight building or a building
with mechanical ventilation�

Gas installation

Once it has been decided where the stove will be positioned, a gas in-
stallation should be established in the vicinity of the stove so that the gas
supply and stove can be connected�
As this stove has a sealed combustion chamber and a built-in plinth,
there is no need for a floor slab�
10