Initial Ignition - RAIS/attika VIVA L GAS-Serie Benutzerhandbuch

attika
English RAIS/ - User manual for VIVA L Gas

Initial ignition

For the initial ignition, ensure that all packaging, labels etc� have been
removed from the stove and that the door glass has been cleaned�
Begin at low output, then the stove can be slowly turned up to a great-
er output� When the stove has been heated up, allow the stove to burn
at high output for a couple of hours� This allows the best start and any
damage is avoided�
Be aware that a strange smell and smoke from the stove's surface may
occur during the initial ignition� This is because the paintwork and ma-
terial need to harden but the smell will quickly disappear�
Ensure there is a lot of ventilation, preferably a draught� Children
and pets should be kept at a safe distance from the stove during this
process�
During this process, you should be careful not to touch the visible sur-
faces/glass (very hot!)�
In addition, while heating up and cooling down, the stove may emit a
so-called "clicking sound"� This is due to the great differences in tem-
perature the material is exposed to�
When the stove has been unused for a while, use the same approach as
during the initial ignition�
41