Introduction; Intended Use; Features; Package Contents - Parkside PSF 4.6 A1 Originalbetriebsanleitung

FLASHCHARGE SCREWDRIVER
PSF 4 .6 A1

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety
instructions . Use the product only as described and
for the range of applications specified . Please also
pass these operating instructions on to any future
owner .

Intended use

This appliance is designed for screwing into wood,
plastic and metal . Use this product only as described
and for the areas of applications specified .
The appliance is not intended for commercial use .
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents . The manufacturer accepts no
responsibility for damage(s) attributable to misuse .

Features

Locking button
Rotation direction switch/safety lock-out
ON/OFF switch
Charging contacts
LED light
Tool holder
Bits (in BITBUTLER)
Magnetic bit holder
Charger
Operating LED
Control LED
■ 2 │ GB │ IE │ NI

Package contents

1 FlashCharge screwdriver PSF 4 .6 A1
1 Charger PSF 4 .6 A1-1
5 Bits x 25 mm (in BITBUTLER)
1 Magnetic bit holder
1 Carrying case
1 Set of operating instructions

Technical data

FlashCharge
screwdriver:
Nominal voltage:
Condensers
(integrated):
Rated idle speed:
Max . torque:
Tool holder:
Use only the following charger to charge the
FlashCharge screwdriver:
PSF 4.6 A1-1:
INPUT:
Rated voltage:
Rated power:
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Fuse (internal):
Protection class:
PSF 4.6 A1
(direct current)
4 .6 V
2x 2 .3 V, 320F
n 200 rpm
0
max . 4 Nm
6 .35 mm (¼")
100–240 V ∼ 50/60 Hz
(alternating current)
85 W
(direct current)
4 .6 V
2 .8 A
approx . 60 sec
3 .15 A T3.15A
II / (double insulation)
PSF 4.6 A1