Inhaltsverzeichnis
Werbung
5 System Setup
Menu item
Battery
Time
L-Connector
6 Date & Time
fig.date-1a.eps
Here you can specify the date and time.
If Project Name is set to Date, the time you specify here will
be used to specify the date in the project name.
This setting is also used for the date and time shown in the
main screen.
7 Project Name
You can use Name 1–8 to specify eight different names. The project name will consist of this name plus a
consecutive number of 001, 002, 003 ... appended to it. For example, in the case of the default setting
R4_Scene1, the project name will be R4_Scene1_001.
In order to use a name you've specified here, you'll need to set the Recording Setup parameter Project
Name to Name 1–8.
Available characters
(space) !#$%&'()+,-.01234546789;=@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_` abcdefghijklmnopqrstuvwxyz{}
8 HDD Utility
Here you can execute various utility commands with respect to the R-4's internal hard disk. You can't
execute HDD Utility commands during recording or playback.
Command
Format
Check
Value
Function
Set this to the type of batteries you're using.
Choose the Alkaline setting if you're using alkaline batteries, or Ni-MH if you're
Alkaline,
using nickel metal-hydride batteries.
Ni-MH
* If you choose a setting that does not match the type of batteries that are actu-
ally installed, the remaining battery power indication will not be correct.
Disable,
This setting Enables or Disables the function that lets the R-4 be controlled by a
Enable
device connected to the L-connector.
Explanation
Formats the internal hard disk.
All projects and folders in the internal hard disk will be erased; afterwards, the hard disk
will be empty.
* Be sure to back up your projects before you execute this command.
Checks the internal hard disk, and after reorganization, frees up any hard disk space not
used by R-4 projects.
* There is no guarantee that this command will restore the internal hard disk to a normal
operating state. Since this command directly affects the storage area of the hard disk, it
is possible that projects may be affected. Be sure to back up your projects before you ex-
ecute this command.
Year
Month
Date (Weekday)
Time
System settings
63
Werbung
Kapitel
Inhaltsverzeichnis
