Inhaltsverzeichnis
Werbung
Playing back
Playing back
Normal playback
After you've performed the steps described in "Connections before playback" (p. 34) and "Settings
before playback" (p. 36), proceed as follows.
1
Select the project that you want to play.
In the main screen, press the [ENTER/FINDER] button. In the Finder screen that appears, use the up/
down [CURSOR] buttons and the [SCRUB] dial to select a project. For more about the Finder screen,
refer to "The Finder screen" (p. 41).
Alternatively, you can use the front panel's [PREV] button or [NEXT] button to select the project you
want to play. The projects are in alphabetical order.
2
Press the [PLAY] button.
The selected project will play.
3
Slowly raise the [MONITOR] level knob to the desired volume for listening.
* Projects with names beginning with "." are ignored, and will not be shown.
* The project name will not be displayed correctly if the project name contains double-byte characters (e.g., Japanese).
To ensure that you can view the file name correctly, don't use double-byte characters in the filename.
* Projects whose filename extension is other than .pjt or .wav will be ignored, and will not be shown.
38
Werbung
Kapitel
Inhaltsverzeichnis
