Deleting A Project (Delete) - Edirol R-4 Bedienungsanleitung

The Finder screen

Deleting a project (Delete)

fig.finder-1.eps
1
With the main screen shown in the display, press the [ENTER/
FINDER] button. The Finder screen shown in the illustration will
appear.
Projects are shown in descending alphabetical order.
fig.finder-select.eps
2
In the Finder screen, use the [CURSOR] up/down buttons or
the [SCRUB] dial to select the project you want to delete. Then
press the [ENTER] button.
If the desired project is in a folder, the hard disk (HD),
or the CompactFlash card (CF), you can press the [CURSOR] right button to move into the
selected folder (i.e., move to a lower-level folder). If you want to move back to the upper-level
folder, press the [CURSOR] left button.
fig.finder-cf.eps
* If you want to select the CompactFlash card, select the hard disk (HD)
and then press the [CURSOR] right button; the contents of the
CompactFlash card will appear. However, this will not be displayed if
no CompactFlash card is inserted.
fig.finder-delete1.eps
3
When the screen shown in the illustration appears, use the
[CURSOR] buttons to choose 2 Delete.
fig.finder-delete2.eps
4
The screen shown in the illustration will appear. Press the
[ENTER] button to execute the Delete operation.
* If you decide to cancel without executing, press the [EXIT] button
before you press the [ENTER] button.
fig.finder-delete3.eps
Don't turn off the power while a project is being deleted.
42