Flexim WaveInjector WI-400 Serie Ergänzung Zur Betriebsanleitung Seite 82

WaveInjector WI-400
Fig. 4.47: Length of the pipe contact surface
1
l
1 – pipe contact surface of the coupling plate
Disassembly of the transducer box
• Loosen the 2 screws of the transducer box, see Fig. 4.48. Do not loosen the positioning screw.
• Remove the cover.
• Place a piece of the metallic coupling foil on the entire pipe contact surface of the coupling plate, see Fig. 4.49. It is recom-
mended to use pliers.
Fig. 4.48: Disassembly of the transducer box
1
4
1 – screws
2 – cover
3 – rail with coupling plate
4 – positioning screw
Fig. 4.49: Placing the coupling foil
1
1 – metallic coupling foil
82
2
3
Supplement to operating instruction - ENGLISH
2018-01-19, SUFLUXUS_WIV4-3EN