Flexim WaveInjector WI-400 Serie Ergänzung Zur Betriebsanleitung Seite 71

Supplement to operating instruction - ENGLISH
Removal of the jaw (A)
• Remove the chain and the jaw (A) from the pipe, see Fig. 4.21 and Fig. 4.22.
• Rotate the installation through 180°, see Fig. 4.23.
Fig. 4.22: Removal of the jaw (A)
Fig. 4.23: Installation rotated through 180°
Mounting of the chain support (B)
• Place the chain support (B) in the distance WI Clamp dist. on the pipe, see section 5.2, Fig. 4.24 and Fig. 4.25.
• Tighten the screws of chain support.
• Rotate the installation through 180°, see Fig. 4.26.
Fig. 4.24: Mounting of the chain support (B)
1 – screw
2018-01-19, SUFLUXUS_WIV4-3EN
A
B
B
A
B
B
1
A
WaveInjector WI-400
71