Flexim WaveInjector WI-400 Serie Ergänzung Zur Betriebsanleitung Seite 67

Supplement to operating instruction - ENGLISH
Fig. 4.10: Installation of the fitting pieces
1 – fitting pieces
• Place the installed jaw and chain support on the pipe, see Fig. 4.11.
Fig. 4.11: Positioning on the pipe
• Push the chain into the hooks of the jaw (inner cog), see Fig. 4.12.
• Place the chain around the pipe and tighten it.
• Push the end of the chain into the second hook of the jaw.
• Fix the chain, jaw and chain support on the pipe by slightly tightening the nuts.
Fig. 4.12: Installation of the chain
1 – hooks
2 – nuts
2018-01-19, SUFLUXUS_WIV4-3EN
1
2
1
WaveInjector WI-400
67