Flexim WaveInjector WI-400 Serie Ergänzung Zur Betriebsanleitung Seite 73

Supplement to operating instruction - ENGLISH
Fig. 4.27: Installation of the jaw (A)
1 – screw
Fig. 4.28: Installation of the chain
1 – nuts
Alignment of the installation
• Place the jaw and the chain support on the markings made on the pipe, see Fig. 4.4. Use the pipe planer for the align-
ment.
• Tighten the nuts of both jaws, see Fig. 4.29:
– Tighten alternately both nuts of each jaw preventing distortion or moving.
– The disk spring packages must not be compressed completely.
2018-01-19, SUFLUXUS_WIV4-3EN
A
A
1
B
B
A
A
1
B
B
WaveInjector WI-400
73