Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Supplement to operating instruction - ENGLISH
2
Safety instructions
2.1
General safety instructions
Prior to any work, read the supplement and the operating instruction of the ultrasonic flowmeter FLUXUS carefully and in
full. Failure to comply with the instructions, in particular with the safety instructions, poses a risk to health and can lead to
material damages. For further information, contact FLEXIM.
During installation and operation of the measuring equipment, observe the ambient and installation conditions specified in
the documentation. The measuring equipment comprises the transmitter, the transducers and the accessories.
If troubles or damages have occurred during installation or operation of the measuring equipment, please inform FLEXIM.
If the measuring point is within an explosive atmosphere, the danger zone and present explosive atmosphere have to be
determined. The transmitter, transducers and accessories have to be appropriate and approved for the conditions within
the corresponding zone. The WaveInjector forms part of the accessories.
The WaveInjector has to be checked for proper condition and operational safety before each use. It is not allowed to make
unauthorized modifications or alterations to the WaveInjector.
The personnel has to be suitably trained and experienced for the work.
Observe the "Safety instructions for the use in explosive atmospheres", see document SIFLUXUS.
Observe the instructions for hazardous substances and the respective safety data sheets.
2.2
Intended use
The WaveInjector is a transducer mounting fixture for the ultrasonic flow measurement at extreme temperatures.
• All instructions of this supplement have to be observed to ensure intended use.
• Any use beyond or other than the intended use is not covered by warranty and can present a danger. Any damage aris-
ing from not intended use shall be solely the liability of the operator or user.
• Observe the operating conditions, e.g., operating temperature. For technical data of the WaveInjector, see Technical
specification.
2.3
Not intended use
Not intended use in terms of a misuse means:
• any work on the WaveInjector without observing all instructions in this supplement
• use of transmitter, transducer and accessories combinations not intended by FLEXIM
• installation of the transmitter, transducers and accessories in explosive atmospheres they are not approved for
• any work on the WaveInjector (e.g., installation, dismounting, connection, start-up, operation, service and maintenance)
carried out by unauthorized and untrained personnel
2.4
Safety instructions for the user
Any work on the WaveInjector has to be carried out by authorized and qualified personnel. Observe the safety instructions
in the supplement. For technical data of the WaveInjector, see Technical specification.
• Observe the safety and accident prevention regulations applicable on the site of operation.
• Only use the supplied mounting fixtures and transducers as well as the intended accessories.
• Always wear the required personal protective equipment.
2.5
Safety instructions for the operator
• The operator shall qualify the personnel to perform their assigned tasks. The operator shall provide the required personal
protective equipment and oblige the personnel to wear it. It is recommended to risk assess the workplace.
• Besides the safety instructions in this supplement, the health, safety and environment regulations applicable for the
range of application of the WaveInjector have to be observed.
• The WaveInjector is maintenance-free. The operator shall carry out periodic checks for changes or damages that can
present a danger. For further information, contact FLEXIM.
• Observe the specifications for the installation of the WaveInjector, see chapter 4.
2018-01-19, SUFLUXUS_WIV4-3EN
WaveInjector WI-400
55
Quicklinks ausblenden:
Werbung
Kapitel
