Flexim WaveInjector WI-400 Serie Ergänzung Zur Betriebsanleitung Seite 72

WaveInjector WI-400
Fig. 4.25: Distance between jaw and chain support (side view)
Fig. 4.26: Installation rotated through 180°
Installation of the jaw (A)
• Place the jaw (A) in the distance WI Clamp dist. on the pipe, see section 5.2 and Fig. 4.27.
• Position the jaw opposite the chain support.
• Tighten the screw on the jaw.
• Push the chain into the hooks of the jaw (inner cog), see Fig. 4.12.
• Place the chain around the pipe and the opposite chain support and tighten it.
• Push the end of the chain into the second hook of the jaw.
• Fix the chain, jaw and chain support on the pipe by slightly tightening the nuts, see Fig. 4.28.
• Check whether the distances a1 and a2 are the same, see Fig. 4.20. The following must be true for the distances: a1 = a2.
72
WI Clamp dist.
B
B
A
A
B
B
Supplement to operating instruction - ENGLISH
2018-01-19, SUFLUXUS_WIV4-3EN