Disassembly And Storage; Dismantling, Transportation And Storage; Dismantling; Transportation And Storage - Heidolph Hei-MIX Promax 2020 Originalbetriebsanleitung

Assembly
Components multi-tier attachment:
▪ 4 columns
▪
1 box-end spanner
▪ 8 clamping sleeves
To adjust height of clamping sleeves
correctly the columns feature four marks
A, B, C and D.
▪ 25 ml Erlenmeyer flask, 3 platforms,
marks A and D
▪ 50 ml Erlenmeyer flask, 2 platforms,
marks C
▪ 100 ml Erlenmeyer flask, 2 platforms,
marks B
▪ 250 ml Erlenmeyer flask, 2 platforms,
marks A
➜ Install 4 ea. columns and pull tight
with box-end spanner from your
hardware bag.
➜ Locate first platform over columns.
➜ Slip 4 ea. clamping sleeves with wing
bolt situated below over columns.
➜ Align top rim of clamping sleeves with
adequate marks and secure with wing
bolts.
✓ Wing bolts must be adjusted vertically
to the outer edge of the platform.
➜ Ensure all bolts and screws have been
pulled tight.
➜ Install second platform over columns
and seat on clamping sleeves.
➜ Install 3rd platform (if required) by
repeating above steps.
A
B
Marks
C
D
Column
Clamping sleeve
Wing bolt
Perforated platform 2
Clamping sleeves
22

Disassembly and Storage

Disassembly and Storage

Dismantling, transportation and storage



Dismantling

Warning:
Risk of injury!
While the device is plugged in you might be at harm if the device is
accidentally switched to ON mode.
Prior to dismantling device ensure that the device is switched off and
the plug is pulled from the electric socket.
✓ The device is switched off.
➜ Disconnect plug from power socket.
➜ Disconnect plug from socket on the device.
➜ Remove all vessels.
➜ Disassemble attachments.

Transportation and storage

➜ Store and transport the device and its components only if they were emptied, cleaned
and dismantled.
➜ To carry the device wear safety gloves and lift the unit from below.
➜ Store and transport the device and parts of device in the original packing material or
alternatively in an adequate container to prevent damage.
➜ Seal the package carefully against unauthorized or accidental opening.
➜ Store the device in a dry and frost-free place.
Improper storage and transportation may result in damages to the
system and the mechanical components.
Avoid any kind of shocks during transportation.
23