Alarm Letter Codes - Siemens SITRANS F-Serie Bedienungsanleitung

Troubleshooting

4.2 Alarm Letter Codes

4.2 Alarm Letter Codes
Letter Code
S
E
R
F
A
M
K
I
The display shown below indicates where the Alarm Codes appear on the LCD display
screen.
①
42
Alarm
Spacing Transducer spacing may need readjustment.
Empty Pipe is empty.
Rate Flow above High setting or below Low setting.
Fault Three continuous seconds without new data update.
Aeration Current aeration percentage exceeds the alarm set point.
Memory Last valid reading for a selected interval during Fault condition.
Makeup In-Process Makeup occurred.
Interface Liquid Vs exceeds interface alarm set point.
Alarm Codes
Description
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA