Application; General Description; Delivery Contents; Description Of Operation - Parkside PNTS 1400 G3 Originalbetriebsanleitung

Application

The appliance is intended for domestic wet
and dry vacuuming in, for example, the
house, work room, car or garage.
This equipment is not suitable for commercial
use. Commercial use will invalidate the
guarantee.
Vacuuming of flammable or explosive
materials or those which endanger health
is prohibited. The manufacturer will not be
held responsible for injuries resulting from
use which does not comply with the
directions, or from incorrect use.

General description

The illustration of the principal
functioning parts can be found on
the front and back foldout pages.

Delivery Contents

Unpack the package and check that it is
complete.
The equipment is supplied with the motor
head on stainless steel container. To take off
the motor head and remove the accessories,
- Release the handle locking lever(4)
- remove the motor head(5) by motor head
handle(6).
- Motor head
- Stainless steel container
- upper machine handle
- 5 steering castor kits
- Telescopic tube
- Suction hose
- Air regulation handle
- Foam filter
- Cartridge filter with filter locking screw
(already mounted)
- Dry dust bag
GB
- Switchable floor nozzle
- Crevice nozzle
- 8 cross-head screws
- Instruction Manual
Dispose of the packaging material in a
proper manner.

Description of operation

The equipment is fitted with a stable stainless
steel container to hold liquid and dust.
The steering castors allow for maximum
mobility of the device. For wet vacuuming,
the suction airflow is switched off by a float
when the stainless steel container is full. The
equipment also has a blow function.
To prevent electrostatic charging during
vacuuming, an anti-static chain is fitted on
the bottom of the equipment.
The following describes the function of the
operating parts.
IE NI CY
7