Using Your Appliance; Using The Programmer; º How To Set The Time - De Dietrich DOP740X Betriebsanleitung

99641511_A_MULTI.qxp
EN

2 / USING YOUR APPLIANCE

• •

USING THE PROGRAMMER

• How to set the time
- - When plugged in
The displays flashes 12:00 (fig.1).
Set the time by pressing the + or - buttons
(holding your finger on the button allows you
to scroll through the numbers rapidly) (fig.2).
Example: 12:30
Press the button to confirm.
The display stops flashing (fig.3).
- To set the time on the clock
Press and hold the
seconds until the display starts flashing
(fig.2), then release.
Audible beeps indicate that it is now possible
to set the time.
Adjust the clock setting with the + and -
buttons (fig.2).
Press the button O O K K to confirm.
Warning
If the OK button is not pressed, the
adjustment will be automatically recorded
after a few seconds.
20/03/2007 12:12 Page 66
button for a few
66
fig.1
fig.2
fig.3
fig.1
fig.2