Trouble Shooting - Parkside PHSA 12 A1 Originalbetriebsanleitung

GB MT

Trouble Shooting

Problem Possible cause
Battery (
Appliance
Battery (
won't start
Safety switch (
properly
On/Off switch (
Internal loose contact
Intermittent
operation
On/Off switch (
Knife bar (
Knife bar
Knife bar (
becomes hot
Too much friction due to lack of
lubrication
Too much friction due to miss-
ing lubrication
Knife bar (
Bad trim
Knife bar (
Bad cutting technique
Battery (
48
9) discharged
9) not inserted
3) not pressed
8) defective
7) defective
1) is blunt
1) is notched
1) dirty
1) blunt
9) not fully charged
Corrective action
Recharge battery (see „Charger and
rechargeable battery operating in-
structions")
Insert battery (see „Charger and re-
chargeable battery operating instruc-
tions")
Turn on (see "Operation")
Send in to Service Centre for repair
Send in to Service Centre for repair
Have the Knife bar sharpened or re-
placed (Service Centre)
Have the Knife bar checked or re-
placed (Service Centre)
Oil the knife bar (
Lubricate knife bar (
Clean knife bar
Grind or have knife bar replaced
(Service Centre)
See ("Working with the hedge trimmer")
Recharge battery (see "Charging")
1)
1)