Introduction; Items Supplied; Safety Notes - Siemens SITRANS FUT1010 IP65 NEMA 4X Bedienungsanleitung

Introduction

This Quick Start is for Siemens SITRANS FUT1010 IP65 (NEMA 4X) liquid flowmeters. The
flowmeter includes the Transmitter and the Sensor Body with the TransLoc
and is shipped with factory installed sensors and preset Site Setups.
The flowmeter menu parameters are pre-set at the factory. It is not recommended to change
the factory preset parameters. If changes are desired, use care when changing Site Setup
and Transducer Install menu cells.
Note
This Quick Start applies to the following FUT1010 IP65 NEMA 4X operating systems: Version
3.03.00 and later / Version 5.03.00 and later.
1.1

Items supplied

● SITRANS F Flowmeter (Transmitter and Sensor Body)
● SITRANS F literature CD
● Quick Start
● For additional items refer to your packing slip.
1.2

Safety Notes

Safety Information for Hazardous Areas
Explosion Hazard. Will Cause Death, Serious Injury or Property Damage.
Restrict use and repair to qualified personnel.
Death or severe personal injury and/or equipment and property damage will result if proper
Hazardous (Classified) Locations installation precautions are not taken.
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 6/2010, A5E02639182A Revision 02
CAUTION
DANGER
DANGER
1
Mounting System
TM
5