Commissioning
4.2 Commissioning
1. Apply power.
2. Within 10 seconds of power-up the main display will become active and a typical Siemens
3. The transmitter is ready to report flow. Press <MENU> key twice to display flow.
30
graphic will appear briefly. The screen also identifies the software version of the unit as
shown below.
①
Software operating system version
Figure 4-1
Splash Screen
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 6/2010, A5E02639182A Revision 02