Installing/mounting
2.1
Application Guidelines
Basic Requirements
● Avoid vertical pipes flowing in a downward direction.
● Select a location with the longest straight run of pipe.
● Identify upstream piping configuration (elbow, reducer, etc.).
● Avoid pressure reduction components upstream.
Additonal Requirements for Liquid Applications
● Pipe must be full to achieve proper operation.
2.2
Mounting the Transmitter
Wall Mounting
The transmitter can be mounted on any wall surface including wood, metal or concrete. Use
the appropriate bolts and screws as needed for your mounting application and adhere to local
codes. (See figure below for mounting bracket locations.)
Pipe Mounting
For installation on pipe use Pipe Mount Kit CQO:1012NMB-1 (optional - see catalog). See
figure below.
Note
Pipe mounting kit CQO:1012NMB-1 is not available for NEMA 7 enclosures.
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 6/2010, A5E02639182A Revision 02
Note
Flowmeter Application Data menu [Pipe Config] parameter is preset for [Fully Developed]
flow.
2
11