Connecting
3.1
Transmitter Wiring
3.1.1
Connecting Power
Turn off main power before installing AC connections to the transmitter. Contact with exposed
wiring may lead to fire, electric shock, or serious personal injury.
1. Open the transmitter top cover.
2. Unscrew the two power supply access cover fasteners and remove access cover.
3. Locate power supply connector J10. Using a flat blade screwdriver, remove plug P10 from
①
Power Supply
②
Power Supply Access Cover
③
Fuse F1
④
Input Power Conn. J10
Figure 3-1
Input Power Plug (P10) Wiring
4. Pull the desired length of input power wires through a cable gland and into transmitter case
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 6/2010, A5E02639182A Revision 02
DANGER
connector J10. Set aside.
before wiring connector.
⑤
Stripped Wire
⑥
Connector Mounting Screws
⑦
Wire Clamp Screws
3
19