External Stoppage - TdA ZEWMBAD series Technisches Handbuch, Inbetriebnahme Und Betriebsweise

ZWEMBAD SERIES · AIR/WATER SYSTEM

5.8 External Stoppage

If the user must install any type of timing device or emergency stoppage device, it is important
to know that this device can be installed by connecting it directly to the power board of the
system.
The system is designed with external stoppage terminals which can be used for these devices.
Figure 19: System power board.
© ZWEMBAD 2015. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
These terminals are shown with the
identification numbers 23 and 24.
When these terminals are connected the
machine will stop for external reasons and
the following message will appear:
Heat Pump
External Stop
(See Chapter 5.5, Information Messages)
ENGLISH
Page 35 of 234