ZWEMBAD SERIES · AIR/WATER SYSTEM
Test Mode
ON / OFF
Reset Parameters
Press +
© ZWEMBAD 2015. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
PARAMETERS OF THE TECHNICAL MENU: CONTINUATION 2
•
If this parameter is activated, the set reading times
will be much shorter. (Maximum 30 seconds).
•
If it is deactivated, all parameters will be followed.
•
By holding the "+" key for 5 seconds, the
manufacturer's parameters will be reset.
Figure 13: Diagram of the Technical Menu.
ENGLISH
Page 29 of 234