User Menu Functions; Mode Key) - TdA ZEWMBAD series Technisches Handbuch, Inbetriebnahme Und Betriebsweise

ZWEMBAD SERIES · AIR/WATER SYSTEM

5.3 User Menu Functions

5.3.1

(MODE KEY)

This permits the selection of any of the following operational modes, providing these options
have been activated in the technical menu:
DEACTIVATED
COMFORT
FILTRATION
ECO
NOTE
: THE COMPRESSOR WILL NOT START UNTIL THE FAN HAS BEEN OPERATING FOR
30 SECONDS.
NOTE
: ALL FUNCTIONAL MODES HAVE A PRE-ASSIGNED TEMPERATURE SETTING, VERIFY
TEMPERATURE SETTINGS WHEN SELECTING DIFFERENT MODES TO ENSURE THE SET
TEMPRRATURE IS THE ONE DESIRED.
© ZWEMBAD 2015. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
System off.
System always on. The purification pump is activated when the water
temperature falls below the temperature setting.
In order for this option to appear, it must be previously activated in the
technical menu.
Using the and
or lowered.
The system waits for the water to circulate through the circuit and the flow
switch is activated. Although the water temperature is below the setting,
the Heat Pump will follow the external function of the purification pump: it
will not activate it but wait until it is functioning.
Using the and
or lowered.
The system has an extra temperature differential in order for the system to
operate in energy saving mode ECO.
Using the and
or lowered.
keys, the temperature setting can be raised
keys, the temperature setting can be raised
keys, the temperature setting can be raised
ENGLISH
Page 21 of 234