Introduction; Description Of The Heat Pump; Technical Data - TdA ZEWMBAD series Technisches Handbuch, Inbetriebnahme Und Betriebsweise

ZWEMBAD SERIES · AIR/WATER SYSTEM

1 INTRODUCTION

Thank you for acquiring the heat pump for heating outdoor swimming pools. The experience our company has gained
during more than 25 years in the world of air conditioning of swimming pools has been put to your service in this product,
in which we also incorporate the technical breakthroughs that turn this heat pump into the equipment that can solve once
and for all the air conditioning of your swimming pool, extending thus the length of your bathing season.
We kindly the client or installer to read this manual carefully in order to: Complete a correct installation and
start-up. Be familiar with all the potentialities of the unit and to take into account all the necessary
IT IS SUGGESTED THAT NOTE BE MADE OF THE FOLLOWING DATA
INSTALLER COMPANY
DATE
TELEPHONE
MODEL
SERIAL NUMBER
Dealer's stamp

2 DESCRIPTION OF THE HEAT PUMP

2.1 Technical Data

- The calculation of power has been done with an outdoor air temperature of 16 ºC, a water temperature of 24 ºC and
70% humidity.
- Operational temperature limits:
• Outdoor minimum air temperature: 5ºC
• Maximum temperature of pool water: 40ºC
- Maximum Inlet Water Pressure = 3,5 bar
© ZWEMBAD 2015. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
IMPORTANT
circumstances for its correct and lasting operation.
ENGLISH
Installer's stamp
Page 10 of 234