Parameters Of The Technical Menu - TdA ZEWMBAD series Technisches Handbuch, Inbetriebnahme Und Betriebsweise

ZWEMBAD SERIES · AIR/WATER SYSTEM
The MENU key is used to select the type of operation is desired for the machine:
•
HEAT
•
COOL
• HEAT AND COOL
If the machine is non-reversible, HEAT will be the only operation possible for the machine and
therefore options will not even appear in the menus.
In order to have the operations "Cool" and "Cool+Heat", the machine must be reversible, that is,
be equipped with a 4-way valve.
The COOL option will only appear under two conditions:
•
The machine is reversible (equipped with a 4-way valve).
•
The COOL option was activated in the technical menu.
And the HEAT and COOL options will appear under the above conditions and one additional
condition:
•
The HEAT+COOL MODE option was activated in the technical menu.

5.4 Parameters of the Technical Menu

The technical menu includes certain parameters which condition the operation of the machine.
Accessing the Technical Menu from the User Menu: Just press the
when on the "User Menu":
USER MENU
Ver 1.04
To return to the User Menu from the Technical Menu just repeat the same process: press the
"+" key for five seconds.
NOTE
: AFTER 15 MINUTES OF INACTIVITY ON THE KEYBOARD, THE MACHINE WILL
RETURN FRO M THE TECHNICAL MENU TO THE USER MENU AUTOMATICALLY.
The following table indicates the different parameters which are accessible from the technical
menu:
© ZWEMBAD 2015. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
5 sec.
key for five seconds
TECHNICAL MENU
Ver 1.04
ENGLISH
Page 26 of 234