TdA ZEWMBAD series Technisches Handbuch, Inbetriebnahme Und Betriebsweise Seite 22

ZWEMBAD SERIES · AIR/WATER SYSTEM
Comfort/Filtration ECO
NOTE:
THE DOTTED LINE INDICATES THAT SOME OF THE OPTIONS SHOWN IN THE
DIAGRAMS MUST BE ACTIVATED IN THE TECHNICAL MENU OR BY THE MANUFACTURER,
OTHERWISE THESE OPTIONS WILL NOT APPEAR.
IN THIS SPECIFIC CASE, THE "COMFORT" FUNCTION WILL NOT APPEAR IF IT HAS NOT
BEEN ACTIVATED IN THE TECHNICAL MENU.
If the system is equipped with a 4-way valve (a reversible machine), and the corresponding
options have been activated in the Technical Menu, the system will have 2 x the number of
functional modes if the system is configured to "cool" and 4 x if it is configured to "heat + cool".
Thus, the total number of functional modes for non-reversible machines (only designed to heat)
are the following:
If the machine is equipped with a 4-way valve (reversible), the functional modes will be those
indicated above in addition to:
© ZWEMBAD 2015. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
Heat Pump
OFF
Comfort/Filtration
Heat and/or Cool
Heat and/or Cool
Figure 7: MODE Key functions diagram.
Figure 8: Functional modes, non-reversible machine.
Increases or decreases the
temperature setting.
Increases or decreases the
temperature setting.
Heat Pump
OFF
Comfort
Heat
Comfort ECO
Heat
Filtration
Heat
Filtration ECO
Heat
ENGLISH
Page 22 of 234