Siemens simovert masterdrives Betriebsanleitung Seite 358

Parameterizing Steps
9-68
P115 Calculation of motor model
1= Automatic parameterization
2= Motor identification at standstill
3= Complete motor identification
4= No-load measurement
5= n/f controller optimization
6= Self-test
7= Tachometer test
The new special function P060 = 0 (User parameter) enables the user
to put together an important list of parameters especially for his own
application.
When P060 = 0 (User parameter) is selected, apart from parameters
P053, P060 and P358, only those parameters whose numbers have
been entered in indices 4 to 100 of parameter P360 are visible.
P052 Function
(former) selection
6= Auto Param.
7= Mot ID Stop
8= Mot ID All
9= No Load Meas
10= Reg Optim.
11= Auto Test
12= Tach Test
6SE7087-6KD60
Operating Instructions SIMOVERT MASTERDRIVES
04.2006
Siemens AG