Eurochron FWS-1600 Bedienungsanleitung Seite 19

19 Battery compartment
20 Knob for setting the alarm time
21 Hook for hanging device on the wall
100
95
75
25
5
0
D1 - Display for measurement transmission
D2 - Display field for temperature on the sensor and radio channel
D3 - Connection for external measuring sonde (not included in
D4 - Hook for hanging the device on the wall
D5 - Switch for selection of the radio channel
D6 - Battery compartment
D7 - Switch for measurement unit °C / °F for the display on the
D8 - Button for manual data transmission to the main device
D9 - Base - please unfold in order to mount the sensor
DCF77 Signal
The clocks belonging to the FWS-1600 series receive the DCF77
signal which is transmitted from Frankfurt am Main and can be
received in Central Europe. Clocks which are controlled in this
100
way always show the correct time without you having to set
them.
95
Various factors have an influence on the reception of the
75
Synchron signal. For optimum reception please do not place the
clock too close to large metal objects or electronic devices.
Installation close to other sources of radiation or in buildings with
a steel concrete construction can also have a negative effect. A
25
location close to a window is ideal.
After between 2 and 10 minutes, also depending on signal
5
strength, the clock synchronises itself with the DCF signal.
Afterwards the hands are automatically set to the right time.
0
Manually setting the time is not possible. For this reason we
delivery)
sensor
19
19
100
95
75
25
5
0
100
95
75
25
5
0