JB-Lighting VaryLED Anleitung Seite 25

Delete one step of a sequence:
Recall the Standalone menu.
Confirm by pressing key "Enter".
Use keys "+" and "-" to recall the desired step. Confirm selection by pressing key
"Enter". Select menu
by pressing key "Enter".
key "Enter" and the selected step will be deleted.
Reset DMX values of a step:
To reset the DMX values of a step proceed as follows:
Press key "Menu" one time. Then press 5 times key "+" -
will be shown on the display. Confirm by pressing key "Enter".
be displayed. Recall the desired step by means of the keys "+" and "-", confirm
the selection by pressing key "Enter". Select function
the keys "+" and "-". After selecting the function press key "Enter".
displayed. Confirm selection by pressing key "Enter" again. The DMX values of the
selected step will be set to zero.
Store cues from a DMX board:
Select the Standalone menu:
Press key "Menu" first and then press key "+" five times.
be displayed. Confirm selection by pressing key "Enter". Then press key "+" one time
to enter capture function.
the fixture to receive DMX data from a connected DMX board. The display will show
DMX CAPTURE.
CAPT DMX 1/1.
Press "Enter" to confirm and the display will show:
To continue programming press key "-" one time and find:
the display. Press "Enter" to enable fixture to receive DMX data, and see confirmation
DMX CAPTURE
pressing "Enter" again.
(Press "Enter" first time:
X / X). To continue, insert a new step and repeat process.
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein Telefon +49 (0)7304-9617-0
26
STANDALONE STEPS
STEP NR: 1/X
DELETE by pressing key "+". Confirm the selection of the step
SURE? will be displayed. Now confirm again by pressing
CAPT DMX 1/ 1
To store data press "Enter" again. The display will show:
To insert a new step press key "+". The display will show:
on the display. Repeat the process of storing data on the fixture by
START CAPTURE
must be shown on the display.
will be displayed.
STANDALONE STEPS
RESET STEP
STANDALONE STEPS
will be displayed. Press "Enter" to enable
INSERT 2/2.
CAPT DMX 2/2
; Press "Enter" second time:
STEP NR. 1/X will
by means of
SURE? will be
will
SURE?
shown on
CAPT DMX