Seca 606 Bedienungsanleitung Und Garantieerklärung Seite 17

– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.
Automatic switch-off/economy mode
To save energy, the scale switches off automatically after some time:
– 5 minutes after it was last used or
– 2 minutes after it has been switched on and not been used.
Taring weight display (TARE)
The Tare function is very useful if an additional weight (a cage, for example) is to be ig-
nored for weighing purposes.
Proceed as follows:
– Press the Start key with no load on the
scale.
– First place the additional weight (e.g. a
cage) on the scale and activate the Tare
function by pressing and holding the
HOLD/TARE key.
The display is reset to zero.
in the display. The note "TARE"
appears.
– Now place the animal and the additional
weight on the scale.
The scale determines the weight of the
animal without the additional weight.
– You can now perform as many weigh-
ing operations as you like.
Hold the key down again to deactivate
the Tare function; the scale is then back
in normal weighing mode and the tare
value has been erased.
– The tare value is likewise erased by the
scale being switched off.
Model 606
0. 0
appears
17
GB