Wilo Helix VE 52 Einbau- Und Betriebsanleitung Seite 61

Fig. A3
Installation and operating instructions – HELIX­VE 22­36­52
PID control
IN1 sensor input
Selection of the signal type:
IN2 external setpoint input: OFF
PID parameter selection:
"P": ­30.0 ­> +30.0
PID parameter selection:
"I": 10 ms ­> +300 s
PID parameter selection:
"D": 0 ms ­> +300 s
IN2 external setpoint input: ON
IN2 external input
Selection of the signal type:
PID parameter selection:
"P": ­30.0 ­> +30.0
PID parameter selection:
"I": 10 ms ­> +300 s
PID parameter selection:
"D": 0 ms ­> +300 s
English
61