Maintenance; Cleaning; Lubrication; Tightening The Belts - BigRep ONE Betriebsanleitung

Maintenance

8
8. Maintenance

8.1. Cleaning

Print Bed Surface
Clean the print bed (E) with a damp, soft, and lint-free piece of cloth before print-
ing. Do not use any solvent-based detergents!
Do not use any scratchy tools/materials for cleaning. Damages in the surface
can lead to faulty print results.
Use isopropanol to remove heavy soiling.
Extruder and Nozzles
Fine filament threads can occur during the printing process and should be re-
moved after. These threads can also get caught in the hotend ventilation. Regu-
larly check the ventilation and clean if necessary.
To clean mechanical parts from dust, spray components with compressed air.
Display
Clean the display with a damp, lint-free piece of cloth. Do not use solvent-based
detergents!

8.2. Lubrication

Regularly clean and lubricate the X-guide rail (H), Y-guide rail (F), Z-lead spindles
(C), and Z-guide shafts (B).
Please only use approved industrial lubricants. We recommend mineral oil-based
lubricants for rolling or plain bearings.
Do not use grease containing solid components such as graphite or molyb-
denum disulfide (MoS2) for lubrication!
Regularly check the lubrication of individual components. Ensure that they are
always covered by a thin lubricating film.

8.3. Tightening the Belts

Please contact customer service [support.bigrep.com] if the belt tension decreas-
es and the machine does not function properly.
88
BigRep ONE