Safety Hazards - BigRep ONE Betriebsanleitung

BigRep ONE

Safety Hazards

Electrical Hazards
DANGER — HIGH ELECTRIC VOLTAGE
There is an immediate risk of fatal injury in case of contact with live parts.
In case of damage to the insulation, disconnect the device from the power
source immediately and arrange for a qualified specialist to carry out repair!
Never attempt to bypass or deactivate fuses!
Keep moisture away from live parts!
In case of water damage disconnect the device from its power source!
Switch device off completely and disconnect from power source before conduct-
ing any work on the electrical system as well as before any maintenance and re-
pair work.
Any work on electrical components may only be carried out by qualified special-
ists. This applies especially for any work on components inside the control cabi-
net!
Chemical Hazards
Please be sure to always refer to the specifications provided by the manufacturer
or retailer for the individual types of filament material.
CAUTION
Never clean the print bed with solvent-based detergents. They may pro-
duce toxic fumes when heated.
Unauthorized filaments can produce vapors with harmful health effects.
Make sure that the working environment is sufficiently ventilated during the print-
ing process.
Safety
2
53