General Information; General Safety Precautions - EOS Infratec Classic Montage- Und Gebrauchsanweisung

Dear Customer,
With this IR controller you have purchased a
high quality electronic appliance developed
and produced in conformance with the latest
standards and quality guidelines.
Read these instructions carefully to fami-
liarize yourself quickly and simply with the
unit.

General Information

The IR controller is designed for a voltage
of 230 V 50 Hz as a standard feature and
requires a separate 16 A fuse.
Assembly and connection of the infrared
equipment and other electric facilities
must only be carried out by a qualified
specialist; in this regard, VDE 0100 Part
703/2006-2 is to be complied.
Please read the following installation and
operating instructions thoroughly to ensu-
re malfunction-free operation of your IR
controller.
18

General Safety Precautions

• Ensure that the electrical installation
is accomplished only by an authorized
electrician.
• Observe the regulations of our electri-
cal power supply company as well as all
applicable VDE regulations (DIN VDE
0100).
• Caution! Lethal Hazard: Never attempt to
repair or install the unit yourself. Ensure
that the housing cover is removed only
by a trained employee.
• Use the unit only for the intended purpo-
se for control of IR emitters.
• When installing or working on the system
ensure that all poles are separated from
the line power, i.e. switch off circuit brea-
kers or main switch.
• Observe safety and installation instruc-
tions of the manufacturer.
• This device has not been designed for
being used by persons (including child-
ren) that are physically or mentally han-
dicapped or have sensory disabilities.
Moreover, it is not allowed to use this de-
vice without sufficient experience and/or
knowledge, unless these persons will be
supervised by persons responsible for
their security or in case they have been
instructed how to use this device.
• Children are to be supervised in order to
make sure that they do not play with this
device.
GB