Change Audible Signal; Adjust Display Brightness; Night Mode - hanseatic 2013C(G)3.334eETsDpHbB Gebrauchsanleitung

Page EN-28 The timer
Countdown stop
1. Press the "MENU" button once.
The bell symbol flashes and the re-
maining time is shown.
2. Press the two arrow keys "<" and ">" si-
multaneously.
The bell symbol disappears and the
countdown is stopped.

Change audible signal

You can choose between 3 different audible
signals.
1. Press both buttons "<" and ">" simultane-
ously until the dot beneath the symbol "
" flashes.
2. Briefly press the "MENU" button once.
The display shows "ton1".
3. Change the audible signal with the "<" ar-
row button.
The current sound is played and the num-
ber is shown on the display.
After a short time, the setting is saved.

Adjust display brightness

You can adjust display brightness „1" (dark-
est) to „9" (brightest).
1. Press both buttons "<" and ">" simultane-
ously until the dot beneath the symbol "
" flashes.
2. Briefly press the "MENU" button twice.
The display shows "bri9".
3. Change the brightness setting with the "<"
arrow button.
After a short time, the setting is saved.

Night mode

The display is dimmed during the night hours
22:00 to 06:00.