AsViva E3 Benutzerhandbuch Seite 53

ASSEMBLY
Step 4
Attention:
The axle lock hole needs to be downward and make sure the hole between pipe and screw need to
align before using screw (R7) to fix it from bottom to the top side.
1. Stick the decoration cover G to the central support tube D. Mount the right swing handlebar tube S1
to the axle Q by using the washers R15 and R17, washers R20 and the screw R7.
2. Stick the right moving handlebar E1 to the right swing handlebar tube S1. Use the screws R3 and
R6 for this.
3. Repeat this process for the opposite site.
53