Safety Systems - Bosch MUM57B224 Gebrauchsanleitung

W Explanation of the symbols on the appliance or accessory
i
Follow the instructions in the operating instructions.
Y
Caution! Rotating blades.
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X "Cleaning and
servicing" see page 25
Congratulations on the purchase of your
new Bosch appliance. In doing so, you
have opted for a modern, high-quality
domestic appliance. You can find further
information about our products on our
web page.
Contents
For your safety..........................................17
Safety systems .........................................19
Overview...................................................20
Operating positions...................................20
Operation . .................................................21
Cleaning and servicing .............................25
Storage .....................................................25
Troubleshooting . .......................................25
Application examples................................26
Disposal . ...................................................27
Guarantee.................................................27
Optional accessories ................................28
01_MUM57B224_8001028704.indb 19

Safety systems

Start lock-out
See "Operating positions" table.
The appliance can be switched on in posi-
tion 1 and 3 only:
■ when the bowl (11) has been inserted and
turned until it locks into place and
■ the blender drive cover has been
attached (8).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power
is restored. To switch the appliance on
again, turn the rotary switch to 0/off, then
switch on.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload pro-
tection feature has been activated. A possi-
ble cause may be that too much food was
processed at one time.
If a safety system is activated, see
"Troubleshooting".
The operating instructions describe several
models, see also overview of models
(Fig. M). The appliance requires no
maintenance.
For your safety en
19
03.12.2015 14:48:54