Setting The Parameters - Siemens SITRANS F FUS1020 IP65 NEMA 4 Schnellstart

Commissioning

3.3 Setting the Parameters

Note
Use Left Key to return to previous menu.
Typical Installation Menu Screen Example
①
②
③
Figure 3-4
3.3 Setting the Parameters
Flowmeter Programming
Note
Before creating a site select English or metric units from the Meter Facilities menu.
Select a Meter Type
1. After power-up, press <ENTER> key to access the top level of the Installation Menu.
2. Press <ENTER> key again to edit second line menu selection.
16
Up Key
Right Key
Down Key
5-Key Touch Keypad
④ ENTER key
⑤ Left Key
SITRANS FUS1020 IP65 NEMA 4 Quick Start
Operating Instructions (Compact), 4/2009, CQO:QSG006 Revision B