Siemens SITRANS F FUS1020 IP65 NEMA 4 Schnellstart Seite 19

3. Trigger <Up/Down Arrow> keys to scroll and select [2 Channel Flow]
4. Press <ENTER> key to select meter type: [Channel 1 Clamp-on] appears.
5. To select [Channel 1 Clamp-on] mode, press <Right Arrow> key.
6. Press <ENTER> key to select mode. [Channel Setup] menu will appear.
Create a Site
1. Press <Right Arrow> key and then <Up/Down Arrow> keys to select [Create/Name Site].
2. Press<Right Arrow> key to select the "?" symbol (see figure below).
3. To create site name use the <Up/Down> and <Right Arrow> keys to select a name.
4. Press <ENTER> key to save the Site name.
SITRANS FUS1020 IP65 NEMA 4 Quick Start
Operating Instructions (Compact), 4/2009, CQO:QSG006 Revision B
Note
Select [2 Channel Flow] if measuring two different pipes and [2 Path Flow] if sensors are
mounted on the same pipe.
Note
IMPORTANT: Colon appears when menu item is selected for entry.
Commissioning
3.3 Setting the Parameters
17