Siemens SITRANS F FUS1020 IP65 NEMA 4 Schnellstart Seite 26

Commissioning
3.4 Transducer Installation
① Spacer Bar
② Spacer Bar Reference Index securing screw
③ Pipe
④ Spacer Bar Number Index securing screw
⑤ Mounting Strap
Figure 3-6 Transducer Installation
6. Place the transducer on the pipe center in the middle of one of the areas you have
cleaned. Make sure its cable connector is pointing away from the other cleaned area.
24
① F-Connector
② Angled Edge
③ Transducer
Figure 3-5 Transducer
④ Back End
⑤ Emitting Surface
⑥ Coupling Compound
⑥ 1021 Series Transducer
⑦ Strap Guide with Centering Pin
⑧ Orientation for single beam transducer at 9 o'clock
position
⑨ Orientation for single beam transducer at 10 & 2
o'clock positions
SITRANS FUS1020 IP65 NEMA 4 Quick Start
Operating Instructions (Compact), 4/2009, CQO:QSG006 Revision B