Installation - Kernau KGH 6482 X Bedienungsanleitung

The installation should be conducted by an authorized service technician as per the
installation instructions. Our company may not be held liable for any losses and da-
mages to human, animals or objects due to any inappropriate use of the unit.
ATTENTION
• Before the installation, check that the gas type and gas pressure stated under the
product fit those of your home. Call the authorized service dealer for possible gas
type changes in future.
• When you first unpack your unit, please inspect it for possible damage. If any oc-
cur, do not use it and consult the service immediately.
• Cut off the electric connection of the unit from the main switch during installation.
• In order that built in cook-tops will operate smoothly the measurements of the
counter on which it will be mounted and the materials used for installation should
be proper, and the counter should be resistant against heat.
Read the following instructions to fix the hob on the counter:
In order to prevent intrusion of particles and liquids between the hob and the counter
attach the adhesive gasket on the hob without allowing any overlapping before the

installation.

• Place the hob on the center of the hole.
• Secure the unit on the counter by using the installation sheet and screws.
• Please review the following figures carefully so that the hob will be installed
properly.
INFORMATION
Preparation of location and electrical and gas installation for the product is under
customer's responsibility.
WARNING
he product must be installed in accordance with all local gas and/or electrical regu-
lations.
WARNING
Prior to installation, visually check if the product has any defects. If so, do not have
it installed. Damaged products cause risks for your safety.
INSTALLATION
PRE-INSTALLATION WARNINGS
EN
39