Installation - Kernau KGH 6434 T CI B Bedienungsanleitung

TECHNICAL INFORMATION
FOR THE INSTALLER
I
nstallation, adjustments of controls and
maintenance must only be carried out by a
qualified engineer.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
Incorrect installation may cause damage to
persons, animals or property for which the
Manufacturer shall
responsible.
During the life of the system, the automatic
safety or regulating devices on the appliance
may only be modified by the manufacturer or
by his duly authorized dealer.
3) INSTALLING THE HOT PLATE
Check that the appliance is in a good condition
1F - 2F (30 cm)
KGH 6434 T CI B
KGH 7534 T CI B
5F (90 cm)

INSTALLATION

not be considered
INST.
A
TIPO:
B
280
A
570
A
570
A
850
after having removed the outer packaging and
internal wrappings from around the various loose
parts. In case of doubt, do not use the appliance
and contact qualified personnel.
Never leave
(cardboard, bags, polystyrene foam, nails, etc.)
within children's reach since they could
become potential sources of danger.
The measurements of the opening made in the top of
the modular cabinet and into which the hot plate will
be installed are indicated in either fig. 7 - 8. Always
comply with the measurements given for the hole into
which the appliance will be recessed (see fig. 7 - 8).
The appliance belongs to class 3 and is
therefore subject to all the provisions
established by the provisions governing such
appliances.
COMPLY WITH THE DIMENSIONS (in mm)
B C
490 55
480 60
480 60
480 60
IMPORTANT!
A
adjustment or transformation
of the cook top to use other
gases requires a QUALIFIED
INSTALLER: a failure to follow
this rule will void the warranty.
FIG. 7
7
the packaging
D E
55 160
60 165
60 165
60 65
perfect installation,
materials
F
70 min.
70 min.
70 min.
70 min.
FIG. 8