Kernau KGH 6482 X Bedienungsanleitung Seite 35

If your hob does not have built in lighter or during black out place the naked flame
over the burner, push the knob and turn it counter-clockwise to the desired point
Gas adjustment should be between maximum and minimum levels, it should not
be between maximum and off position.
To turn the burner off, turn the switch clockwise till it reaches the "off" position.
MODELS EQUIPPED WITH LIGHTER SWITCH
In order to burn one of the burners, press the switch down and bring the switch to
maximum position. When it lights, you can adjust the flame to your needs.
• In order that the hob will operate properly the grills and burner components should
be properly positioned (Figure 1).
• Make sure that the flame of your burner is blue and work quietly. If the flame turns
yellow or makes sound, make sure that all burners fit properly. If the flame color
does not change to blue color then contact the authorized service.
FIRING THE BURNER
(Automatic ignition)
Figure 1
EN
35