Kernau KGH 6482 X Bedienungsanleitung Seite 47

Clean the hob regularly after waiting for it to cool down after each use in order to
keep your hob at the best manner.
Do not take out the control switches in any way during cleaning.
Enamel Parts:
• All enamel parts can be cleaned by using water with soap and suitable detergents.
The hob should be dried thoroughly after the process.
Pan Supports:
• Enamel grills can be washed in the dishwasher.
Burner:
• The burners consisting of two parts may be cleaned by using detergent.
• The burners should be dried after cleaning process and placed their places delica-
tely.
• In the electronic ignition models, the electrode should be kept clean all times.
• In the safety valve models, the thermocouple should be cleaned for failsafe ope-
ration.
• After completion of the process, the burners should be placed back.
• The burning system should not be used when burners are not in their places to
avoid damage to electronic ignition system.
Glass ceramic surfaces:
• Wipe the glass ceramic surface using a piece of cloth dampened with cold water
in a manner as not to leave any cleaning agent on it. Dry with a soft and dry cloth.
Residues may cause damage on the glass ceramic surface when using the hob next
time.
• Dried residues on the glass ceramic surface should under no circumstances be
scraped with hook blades, steel wool or similar tools.
• Remove calcium stains (yellow stains) by a small amount of lime remover such as
vinegar or lemon juice. You can also use suitable commercially available products.
• If the surface is heavily soiled, apply the cleaning agent on stains and wait until it
is absorbed well. Then, clean the surface of the hob with a damp cloth.
INFORMATION
Slight color fading may occur on coatings or other surfaces in time. This will not af-
fect operation of the product. Color fading and stains on the glass ceramic surface is
a normal condition, and not a defect.
EN
47