Kernau KGH 6482 X Bedienungsanleitung Seite 29

• Gas appliances and systems must be regularly checked for proper functioning.
Regulator, hose and its clamp must be checked regularly and replaced within the
periods recommended by its manufacturer or when necessary.
• Clean the gas burners regularly. The flames should be blue and burn evenly.
• Good combustion is required in gas appliances. In case of incomplete combustion,
carbon monoxide (CO) might develop. Carbon monoxide is a colourless, odourless
and very toxic gas, which has a lethal effect even in very small doses.
• Request information about gas emergency telephone numbers and safety measures
in case of gas smell from you local gas provider.
What to do when you smell gas:
• Do not use open flame or do not smoke. Do not operate any electrical switches
(e.g. lamp switch, door bell, etc.) Do not use fixed or mobile phones. Risk of
explosion and toxication!
• Open doors and windows.
• Turn off all valves on gas appliances and gas meter at the main control valve, un-
less it's in a confined space or cellar.
• Check all tubes and connections for tightness. If you still smell gas leave the
property.
• Warn the neighbours.
• Call the fire brigade. Use a telephone outside the house.
• Do not re-enter the property until you are told it is safe to do so.
• If the product has a failure, it should not be operated unless it is repaired by an
Authorized Service Agent. There is the risk of electric shock!
• Only connect the product to a grounded outlet/line with the voltage and protec-
tion as specified in the "Technical specifications". Have the grounding installation
made by a qualified electrician while using the product with or without a transfor-
mer. Our company shall not be liable for any problems arising due to the product
not being earthed in accordance with the local regulations.
• Never wash the product by spreading or pouring water onto it! There is the risk of
electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, al-
ways pull out by holding the plug.
• The product must be disconnected during installation, maintenance, cleaning and
repairing procedures.
ELECTICAL SAFETY
EN
29