Operating Toggle; Diagnostic Display - Handicare SIMPLICITY 2000 series Handbuch

Operating your Handicare stairlift
Figure 5

Operating toggle

Your Handicare stairlift is operated by simply
pressing and holding the operating toggle in
the direction you wish to travel (Figure 5).
The stairlift will automatically stop when the
toggle is released or the stairlift has reached
the end of its travel.
PLEASE NOTE:
In the interest of safety, initial activation of the
stairlift is delayed by 1 second from pressing and
holding the operating toggle to avoid accidental
operation. If the toggle is released while the lift is
in motion, the lift will stop and a delay of 1 second
will occur before the toggle will re start the lift.
When changing the direction of travel the delay
will be 3 seconds before the lift begins to move.
6 USER MANUAL
Figure 6

Diagnostic display

The stairlift is fitted with a diagnostic display
(Figure 6) that displays a code to help diagnose
faults. The display is either mounted on the lower
front panel of the lift or on the downside panel
of the main body of the lift depending on your
particular model. Refer to Appendix 1 for an
explanation of the diagnostic codes. If you
should experience a problem with your lift please
examine the display and make a note of any
codes that are displayed. Please inform the
customer services operator of these codes
when reporting any fault.