Hinged Track (Powered) - Handicare SIMPLICITY 2000 series Handbuch

Operating your Handicare stairlift
Figure 15
Emergency Manual Override
Your Slide Track is fitted with a manual override
that allows the track to be moved in case of
an emergency. This is positioned towards the
bottom of the track (Figure 14).
To move the Slide Track manually you must first
loosen the locking bolt (Figure 15). Use the
spanner supplied (Figure 16) as shown in
(Figure 15) to move the Slide Track.
12 USER MANUAL
Locking
bolt
Going up the stairs
Mount the stairlift as previously directed and
push the operating toggle in the up direction.
The stairlift will, after a short delay, move up the
stairs. Once the lift has passed the hinged track
section it will stop – KEEP THE TOGGLE
PRESSED IN THE UP DIRECTION. At this time
the seat will beep three times whilst the hinge
track automatically folds itself away. When the
hinge is fully folded the stairlift will continue to
the top of the stairs.
Going down the stairs
Mount the stairlift as previously directed and
push the operating toggle in the down direction.
The stairlift will, after a short delay, move down
the stairs. Before the lift has reached the hinged
track section it will stop – KEEP THE TOGGLE
PRESSED IN THE DOWN DIRECTION.
Figure 16
Hinged track
powered (optional)