Preparation And Transport Guide - Dantherm CDT 30 MKII Servicehandbuch

Preparation and transport guide

Introduction
Warning
Unpacking
4
This section is a guide to unpacking, preparation, transport and storage
If the machine has been transported lying down, allow it to stand upright for at least 1
hour before use.
Follow these steps for unpacking:
Step Action
1 Open the top of the pack-
aging
2 Position the box vertically,
with the wheels at the bot-
tom
3 Extract the machine from
the box
4 Loosen the knobs, pull the
handle up to the desired
height and retighten the
knobs
5 Remove the protective foil on the control panel
www.dantherm-ltd.ru • info@dantherm-ltd.ru • +7 (495) 545-48-79
Москва. Каширский проезд д. 19 стр. 2
Illustration
Continued on next page